Product ID:HV THRD CUTG OIL 1/2 PT CLR, 016035
MSDS Date:04/12/1995
FSC:9150
NIIN:00N080826
MSDS Number: CFTMN

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-228-9681

Cage: IO530

Telephone: 402-553-0479

Cage: IO530

OIL MISTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN: MAY
CAUSE DEFATTING AND BLISTERS. INHALATION: MAY CAUSE DELAYED LUNG
INJURY. FUMES MAY CAUSE DIZZINESS, HEADACHE OR UNCONSCIOUSNESS.
INGESTION: MAY CAUSE THROAT AND S TOMACH PAINS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE INDICATED.

First Aid:EMERGENCY FIRST AID CALL: 1-303-623-5716 COLLECT. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IF
EFFECTS PERSIST. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. GET
MEDICAL ATTEN TION FOR BLISTERS. INHALATION: GET MEDICAL ATTENTION
IF ADVERSE EFFECTS OCCUR. INGESTION: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION IF SIGNIFICANT AMOUNT IS SWALLOWED.

Flash Point:356F,180C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE,
HALOGEN.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . TREAT AS AN OIL FIRE, EXCEPT THAT COMBUSTION GASES
CONTAIN SULFUR OXIDES AND HYDROGEN CHLORIDE.
Unusual Fire/Explosion Hazard:NONE INDICATED.

Spill Release Procedures:TAKE UP SPILLS WITH SAND, DIRT OR OTHER
ABSORBENT. CLEAN SURFACES SO THEY DO NOT REMAIN SLIPPERY. TREAT AS
AN OIL SPILL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM FLAMES, HEAT,
OXIDIZING AGENTS AND STRONG ALKALIES. KEEP CONTAINERS CLOSED WHEN
NOT IN USE. KEEP OUT OF REACH OF CHILDREN AND PETS.
Other Precautions:OILY METAL CUTTINGS SHOULD BE HANDLED WITH THE SAME
PRECAUTIONS AS FOR THE CUTTING OIL. KEEP AWAY FROM IGNITION
SOURCES.

Respiratory Protection:WEAR NIOSH APPROVED MIST AND/OR ORGANIC VAPOR
RESPIRATOR WHEN MISTS OR FUMES ARE PRESENT.
Ventilation:VENTILATE WORK AREA.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING PROMPTLY TO AVOID
SKIN EFFECTS & POSSIBILITY OF FIRE. AVOID SWALLOWING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:345F,174C
Melt/Freeze Pt:M.P/F.P Text:2400F,1316C
Spec Gravity:0.98800(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT AMBER OIL WITH HYDROCARBON OIL.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF BURNED: SO, HCL.

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS FOR OIL WASTES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.